End of Line (EOL) values

Wormald

Wormald ST/SMT Panel

Although there are not many of these panels left any more, I thought i would add in a few of the different end of line values for the various zone cards for this panel. The ST panel can be identified by the rotary knobs on the front with left position alarm test, centre position normal, and right position is reset / isolate.

Minerva, 138, 24v, 82K 
SS Thermal MK4, 152 = 12v, 4K7 
Thermal, 181 = 24v, 12K 
Minerva, 256 = 24v, 82K 
Minerva MK3, 312 = 24v, 82K 
SS Thermal, 420 = 24v, 12K 
Minerva, 511 = 24v, 82K 
Low Voltage W.I., 728 = 24v, 1K8 
Intertec, 729 = 24v, 390 
Low Voltage Padde, 734 = 24v, 1K 
High Voltage, 745 = 24v, 220K 
Hard Contact, 746 = 24v, 3K9 
SS 300 Low Voltage 
Fire Control, 911 = 24v, 680 ohm 
Minerva, 138 = 24v, 82K 
SS Thermal MK4, 152 = 12v, 4K7 
Thermal, 181 = 24v, 12K 
Minerva, 256 = 24v, 82K 
Minerva MK3, 312 = 24v, 82K 
SS Thermal, 420 = 24v, 12K 
Minerva, 511 = 24v, 82K 
Low Voltage W.I, 728 = 24v, 1K8 
Intertec, 729 = 24v, 390 ohm 
Low Voltage Padde, 734 = 24v, 1K 
High Voltage, 745 = 24v, 220K 
Hard Contact, 746 = 24v, 3K9 
SS 300 Low Voltage 
Fire Control, 911 = 24v, 680 ohm

Wormald ICM Panel

Again, there are not many of these panels still around but they do exist. You can identify the ICM panel because it's black in colour with grey push buttons.

Minerva, 613 = 12v, 220K
Hard Contact, 614 = 12v, 3K9
Low Voltage, 713 = 24v, 1K8
High Voltage, 717 = 24v, 390K
Hard Contact, 718 = 24v, 3K9
Nittan, 733 = 24v, 680 ohm
Pyrotector, 801 = 24v, 3K9
Hard Contact, 1011 = 12v, 390K
Hard Contact, 1012 = 12v, 3K9

Other Panels

RELAY / SHUTTER PANEL, 680 ohm
Firetrol 50XX, 1K8
F08 / QF8, Special

F200HS

ADU 002, 2K7 in line EOL, 10K
ADU 004, 50 - 5000 ohm or EOL001
ADU 005, 3K9 or 3k83
ADU 005/1, 16K or 14K7

F200H

ITU 004, EOL002
IOC 201 (Gas), EOL001

F4000

ADR, EOL002 or 39K

Ampac

Apollo Devices

I/O = 20k / 4k7
Zone Monitor = 6k2 / 1k8
Sounder = 10k

Ampac Devices

SID = 20k / 4k7
SIOD = 10k / 4k7

3ID = 20k / 4k7
3IOD = 20k / 4k7

DSD = 47k
DCSD = 22k

ZID zone = 6k8 / 10uF
ZID input = 20k / 4k7
ZID output = 10k

QZID zone = 6k8 / 10uF
QZID input = 20k / 4k7
QZID output = 10k

EV3000 / EV100

Speaker = 4k7
EAID = 10k
FIP Input = 10k
Visual = 10k
3 wire WIP = 4k7
2 wire WIP = 1k8

Tone Generator

EV20/60/120 = 47k
EV40 = 22k